Qingdao Guihe Measurement & Control Technology Co., Ltd
Petrol station Automatic Tank Gauge manufacturer. sally@guihecekong.com +8618669782630
Add to Cart
Automatic Tank Gauging
The product level and temperature in a tank are measured continuously and automatically analyzed and recorded by a computer-this saves labour and time
The ATGS replaces the use of the dip stick to measure product level and perform inventory control. This mode records the activities of an in-service tank, including deliveries
In the "Leak test mode," the tank is taken out of service and the product level and temperature are measured for at least one hour to detect possible leaks. The ATG system works alone or with a Dispensing Controller or Point of Sale (POS) system
Tank inventory information is posted directly to a website
Sites can be viewed or managed remotely via the internet or on the site
Reports and alarms etc. can be customised to the clients requirements
Magnetostrictive level sonsor (SYW-A )
| Item | SYW-A |
| Purpose | To measure fuel level, water level and temperature |
| Titles of medium | Gasoline, diesel, kerosene, ethanol , water etc. |
| State of medium | Liquid |
| Explosion-proof grade | ExiaIIBT4 (Intrinsically safe) |
| Pressure range | -0.02Mpa~0.6Mpa |
| Certificate | PCEC Conformity Certificate of Explosion-proof / Permit of Manufacture Measuring Instruments |
| Temperature | -40℃~70℃ |
| Accuracy | ±0.3mm |
| Water Level Accuracy | ±0.5mm |
| Temperature Accuracy | ±0.2℃ |
| Height Resolution | 0.023mm |
| Repeatability | ±0.1mm |
| Environmental Temperature Effect | Error<0.2mm |
| Vibration Effect | Error<0.5mm |
| Lowest Product Inactive Zone | 2.5'' floater-180mm |
| Lowest Water Inactive Zone | 2.5'' floater-25mm |
| Measured Variable | Product level, interface level and temperature of 5 sensors and average temperature |
| Probe Length | 600~3500mm |
| Method of Communication | RS-485 |
| Probe Material | 1Cr18Ni9Ti |
| Power Supply | +24~26VDC |
| Protection Class of Probe Canister | IP67 |
| Max Communication Distance | 1200m |
• Can add density floater If need measure density.(Density measure accuracy:±0.5%)
Installation:
1. Provide necessary conditions for the customers visiting factory.
2. Good quality with competitive price.
3. All products have been strictly Quality Checked before shipping.
4. Free repair within 12 months.
5. Great after-sale service and offer solution within 24 hours.
6.OEM is ok.
Qingdao Guihe Measurement & Control Technology Co., Ltd was founded in 2002, is a professional manufacturer of petroleum equipment. We specialized in producing Magnetostrictive liquid level meter (tank gauging system), Underground fuel tank volume table calibration system, Double layer tank leakage detector, Double layer pipeline leakage detector, Tank car liquid level meter, Human body electrostatic discharge alarm. We also providing different customers with personalized solutions.